DTS6 Product Exhibition Video:
DTS CANOpen is a high-performance digital MEMS dual-axis dynamic tilt sensor independently developed by RUICOM Technology, specifically designed for real-time attitude monitoring of moving vehicles. It is optimized for tilt measurement under vibration or motion conditions. This product integrates a triaxial accelerometer and gyroscope sensing unit, achieving multi-source data fusion through an adaptive Kalman filter algorithm. It can accurately calculate and output the spatial attitude parameters of the vehicle under motion. Employing the standardized CANOPEN communication protocol, it ensures seamless integration with industrial control systems, meeting the protocol compatibility and application reliability requirements of demanding industrial scenarios.
Based on non-contact MEMS sensing principles, this product supports real-time tilt data output, eliminating the need for planar relative calibration during installation. The sensor incorporates a 24-bit high-precision ADC module and a six-axis inertial measurement unit (IMU). Embedded algorithms compensate for nonlinear errors, axial crosstalk, temperature drift effects, and rotational centrifugal acceleration interference in real time, effectively suppressing measurement deviations caused by motion acceleration and significantly improving measurement accuracy in dynamic environments. This technical characteristic enables it to maintain long-term measurement stability under extreme motion conditions and harsh operating conditions.
As a professional-grade sensor for dynamic/static dual-mode measurement, the DTS CANOpen boasts high immunity to disturbances and can withstand high mechanical shocks and wide-frequency vibration environments. Its industrial-grade protection design (IP67/IP68) and wide operating temperature range of -40℃ to +85℃ make it the preferred solution for attitude control in industrial automation, engineering machinery, and heavy equipment.
Technical Characteristics
★ Dual-axis measurement range ±90°
★ Resolution 0.01°
★ Dynamic accuracy ±0.1°
★ Static accuracy ±0.05°
★ CANOpen protocol
★ Three protection levels available
Application Field
★ High-impact vibration crushing equipment
★ Engineering vehicle equipment monitoring and control
★ Construction equipment leveling
★ Agricultural machinery monitoring and control
★ Aircraft attitude control
★ Ship attitude monitoring
Performance Parameters
|
DTS CANOpen
|
Unit
|
Parameter
|
|
Measurement Range
|
°
|
X-tilt ±180°, Y-tilt ±90°
|
|
Measurement Axis
|
axis
|
X & Y dual-axis
|
|
Roll and Pitch Resolution 1)
|
°
|
0.01
|
|
Roll and Pitch Static Accuracy @25℃
|
°
|
±0.05
|
|
Roll and Pitch Dynamic Accuracy (rms) @25℃
|
°
|
±0.1
|
|
Gyroscope
|
Gyroscope range
|
°/s
|
±300
|
|
Zero-bias stability (10s mean)
|
°/h
|
8.5
|
|
Zero-bias instability (allan)
|
°/h
|
4.5
|
|
Angle random walk coefficient (allan)
|
°/sqrt(h)
|
0.25
|
|
Acceleration
|
Acceleration range
|
g
|
±4 / ±16(optional)
|
|
Bias stability (10s mean)
|
mg
|
0.02
|
|
Bias instability (allan)
|
mg
|
0.005
|
|
Velocity random walk coefficient (allan)
|
m/s/sqrt(h)
|
0.005
|
|
Zero-point temperature coefficient3)@-40～85℃
|
°/℃
|
±0.01
|
|
Sensitivity temperature coefficient4)@-40～85℃
|
ppm/℃
|
≤100
|
|
Power-on time
|
S
|
≤3.5
|
|
Response time
|
S
|
0.01
|
|
Communication protocol
|
-
|
CAN Open
|
|
Electromagnetic compatibility
|
-
|
According to EN61000 and GBT17626
|
|
Mean time between failures (MTBF)
|
hour/time
|
≥98000
|
|
Insulation resistance
|
megaohm
|
≥100
|
|
Shock resistance
|
-
|
100g@11ms, triaxial (half-sine wave)
|
|
Vibration resistance
|
-
|
10grms,10～1000Hz
|
|
Protection class
|
-
|
IP67 / IP68(optional)
|
|
Weight
|
g
|
Single connector ≤165g (excluding cable)
Dual connector ≤180g (excluding cable)
|
|
1) Resolution: The smallest angular change that the sensor can detect within its effective range, reflecting its ability to monitor minute tilt fluctuations.
2) Accuracy: Calculated by performing multiple repeated measurements (sample size ≥ 16) at a fixed angle under standard ambient temperature (25±5℃), representing the root mean square (RMS) error between the measured and true values, characterizing the sensor's overall measurement deviation.
3) Zero-point temperature coefficient: The ratio of the sensor's output value to temperature change under zero-input conditions, defined as the ratio of the zero-point offset within the rated operating temperature range to the room temperature reference value.
4) Sensitivity temperature coefficient: The stability index of the sensor's full-scale output value with temperature changes, characterizing the drift rate of sensitivity relative to the room temperature reference value within the rated temperature range.
|
Electrical Parameters
|
Parameters
|
Condition
|
Minimum Value
|
Typical Value
|
Maximum Value
|
Unit
|
|
Power supply voltage
|
Standard
|
9
|
12
|
24
|
36
|
V
|
|
Other voltage
|
|
Operating current
|
No load
|
|
40mA(12V)
|
|
mA
|
|
|
|
|
|
Operating temperature
|
|
-40
|
|
85
|
℃
|
|
Storage temperature
|
|
-40
|
|
85
|
℃
|
Interface Definition
|
PIN/Thread Color
|
Definition
|
Description
|
|
PIN1 / Brown
|
PE
|
Protective ground
|
|
PIN2 / White
|
9~36V
|
Positive power supply
|
|
PIN3 / Blue
|
GND
|
Negative power supply
|
|
PIN4 / Black
|
CAN_H
|
-
|
|
PIN5 / Gray
|
CAN_L
|
-
|
Connector pin definition diagram PCBA board wiring definition diagram
Product Dimensions
PCBA Dimension Diagram
Single panel dimensions: L39×W37×H12.2mm
Installation dimensions: L35×W28mm
Single-head (male) connector housing dimension drawing
Shell Size: L83×W47×H22.5mm
Recommended screws: 4 M5 screws
head (male and female) connector housing dimension diagram
Shell Size: L96×W47×H22.5mm
Recommended screws: 4 M5 screws
Corrosion-resistant shell size diagram
Shell Size: L95.3×W56×H24.5mm
Recommended screws: 4 M5 screws
Product Tags:
|
|
DTS6 CANOpen Dynamic Tilt Sensor High Shock Resistant Images
|
